CONTROL THE WASTE

• Use heavy plastic sheeting or bags to collect waste. Seal the bag securely with duct tape. Consider double bagging waste to prevent tears. Large components should be wrapped in  protective sheeting and sealed with tape.  
• Bag and seal all waste before removing it from the work area.  
• Store all waste in a secure container or dumpster until disposal.  
• Limit on-site storage time.
• Avoid transporting waste in an open truck or personal vehicle.  
• Water used in cleanup should be filtered and dumped in a toilet if local rules allow. If not collect it in a drum and take it with you. Never dump this water down a sink or tub, down a storm drain, or on the ground. Always dispose of lead contaminated water in accordance with federal, state and local regulations.  
• Because EPA considers most residential renovation and remodeling as “routine residential maintenance,” most waste generated during these activities is classified as solid, non-hazardous waste and should be taken to a licensed solid waste landfill.
• This is not the case for work done in commercial, public or other nonresidential child occupied facilities, where waste may be considered hazardous and require special disposal methods. 
• Always check with state and local requirements before disposing of waste. Don’t forget to check with the county.  
• Sometimes local authorities may have more stringent disposal methods. 
• Always review proper disposal techniques with your company’s Certified RRP Renovator.